10002 153 194 215 230 250 CHEVY PS P/S POWER STEERING BRACKET

Description: PLEASE READ & UNDERSTAND THE ENTIRE DESCRIPTION PRIOR TO PURCHASE!FOR MORE INFORMATION, PLEASE GO TO OUR OFFICIAL DAVIS SPEED EQUIPMENT WEBSITE! WWW.DAVISSPEEDEQUIPMENT.COMNOTE THAT EBAY IS NOW CHARGING SALES TAX. OUR WEBSITE DOES NOT (OUTSIDE WI).BEST BRACKET AVAILABLE. BETTER THAN STOCK. THIS CAN BE ADJUSTED FRONT TO BACK, DOESN'T CARE WHAT PULLEYS YOU ARE USING AND WORKS WITH ALL HEADERS, BOTH STYLES OF CYLINDER HEADS AND THERMOSTAT HOUSINGS.NEWLY REDESIGNED POWER STEERING BRACKET FOR 1962-84 153 194 215 230 250 GM INLINE ENGINES.NOW WORKS WITH BOTH IRON AND ALUMINUM THERMOSTAT HOUSINGS!!BRACKETS ARE TIG WELDED PLAIN STEEL AND COME WITH HARDWARE & INSTRUCTIONS. THEY ARE IN "READY TO PAINT" CONDITION. JUST WIPE DOWN WITH SOLVENT AND PAINT.If you are wondering what to do for a 2 groove setup, if you have the 2 groove balancer WITHOUT the 1/2" wide space between grooves, then a 2 groove water pump pulley from a small block V8 will work. 1955-68 for the small fan bolt pattern, 1969-up for the large fan bolt pattern. For pulleys with the wider 1/2" space between the grooves, you will need to find an original pulley (1975-84 250).REQUIREMENTS FOR USE:1) 153 194 215 230 OR 250 ENGINE. 2) SAGINAW POWER STEERING PUMP. 3) APPROPRIATE UPPER ALTERNATOR BRACKET (SEE PICS). 4) 2 GROOVE BALANCER & WATER PUMP PULLEY. (SEE NOTES BELOW).WHAT THIS IS NOT FOR:1) 292 ENGINES USING 292 WATER PUMP. PLEASE SEE 10003 OR 10004 INSTEAD. 2) IF YOU ARE USING ONE OF THESE ENGINES IN A 1955 1ST SERIES OR OLDER TRUCK OR A 1948 OR OLDER CAR, THEN THIS WILL BE TOO WIDE. PLEASE SEE 10021 INSTEAD. 3) TRYING TO RUN BOTH PS & ALT ON SAME SINGLE BELT. NOT ENOUGH BELT WRAP ON ALT. (SEE NOTES BELOW).NOTES OF INTEREST: PUMP CAN BE ADJUSTED FRONT TO BACK TO ALLOW FOR DIFFERENT PULLEY ARRANGEMENTS.CAN BE USED ON A 292 IF IT HAS BEEN CHANGED OVER TO A 250 WATER PUMP AND THERMOSTAT HOUSING.10002 DOES NOT INCLUDE PUMP, PULLEYS OR BELTS.WORKS WITH STOCK & AFTERMARKET EXHAUST MANIFOLDS & HEADERS.WORKS WITH BOTH 5-1/2" & 7" WATER PUMP PULLEY SIZES.IF YOU DO NOT HAVE A 2 GROOVE BALANCER OR WATER PUMP PULLEY AND DO NOT INTEND TO CHANGE TO 2 GROOVES, THEN PLEASE SEE PART 10005 or 10089 INSTEAD. IF YOU HAVE 2 GROOVES ON WATER PUMP AND BALANCER AND INTEND TO ALSO USE AC, PLEASE SEE 10008, 10090 or 10091 INSTEAD.TRYING TO RUN THIS AND YOUR ALTERNATOR OFF ONE BELT DOES NOT USUALLY WORK BECAUSE YOU WON'T HAVE ENOUGH WRAP ON THE ALTERNATOR PULLEY. USE SEPARATE BELTS AS SHOWN IN PICTURES.WILL NOT WORK WITH THE LARGE UGLY UPPER ALTERNATOR BRACKET THAT BOLTS TO THE HEAD. YOU NEED TO USE THE EARLIER "STRAP" TYPE, OR BUY ONE OF OUR ALTERNATOR BRACKETS, PART 10000 OR 10022 OR 10094. WORKS WITH 1X4, 2X1 & 3X1 INTAKES, HOWEVER CARB LINKAGE & FUEL LINES MAY BE AN ISSUE ON 3X1 SETUPS. USING A 2 GROOVE OR A DEEP 1 GROOVE PULLEY ON THE PS PUMP WILL HELP GIVE THE FRONT CARB MORE ROOM.PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION. KEYED SHAFT PUMPS ARE RECOMMENDED. 1969 TRUCK 6CYL PUMP WORKS WELL FOR REFERENCE. SHAPE OF RESERVOIR ISN'T RELEVANT. BOTH "MILK JUG" AND "A-FRAME" STYLES WORK FINE. ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA. All designs are the property of Davis Speed Equipment, LLC See my other listings for: Brackets for 292 engines are also available. 216-261 brackets available. GMC brackets available.WANT TO SEE MY OTHER PARTS? 1) THEN GO TO THE TOP OF THIS PAGE. 2) LOOK UNDER MY USER I.D. 3) CLICK ON "VISIT STORE" For Chevy Chevrolet 194 230 250 215 power steering in chevelle nova impala belair caprice chevyII c10 c20 c30 p10 p20 p30 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 and 1984 .

Price: 158 USD

Location: Madison, Wisconsin

End Time: 2024-10-13T17:37:00.000Z

Shipping Cost: 18.4 USD