1/2500 scale Nebula Class Starship W/ Decals! Star Trek 3d printed resin model

Description: The venerable Nebula class starship was the seldom-seen workhorse of the mid-24th century Federation Starfleet. Now you too can have one in your 1/2500 scale fleet! This is a highly detailed 8-piece 3d printed resin model that comes with decals to make your choice of one of 4 different "weapons-pod" Nebula ships: the Sutherland, Farragut, Monitor, or Leeds. At roughly 8 inches in size, it's a great little display model, especially next to the Round2 plastic 1/2500 scale Enterprise D! Note on the auction: The photo of the Nebula alongside the Enterprise D is for reference only, auction is ONLY for the Nebula class. I do recommend you reinforce the pylons with a strip of thin brass strip to prevent the dreaded nacelle droop. This can be done easily and seamlessly by laminating a small strip of brass into the pre-cut channel of the secondary hull and under the two nacelle pylons, where they won't be seen. Model is unfinished and unpainted. *A note about 3d printed resin models: All 3d models will have small "bumps" from the printing support structure that you will need to sand off; this is best achieved with simple padded nail sanding files or modeler's sanding sticks. The 3d printed resin models I sell are washed in 99% IPA and cured under UV light before shipping, but you may want to allow them to sit in the sun or under a UV source for 5 minutes or so for final post curing if you feel there is any tackiness to the resin surface (there shouldn't be). All resin models, regardless of design, should be washed with a mild abrasive such as Comet or Barkeepers friend before priming and painting.*

Price: 80 USD

Location: Boynton Beach, Florida

End Time: 2024-12-11T13:24:27.000Z

Shipping Cost: 0 USD