15 oz Gold Color Casting Non Precious Alloy Gold Alternative + Free Shipping!

Description: Yellow Alloys Item Details UNI-V Non Precious Yellow (Golden) Alloy is acceptable for use in construction of dental Full Metal Casting (restorative/prosthetic) devices and also jewelry casting, it is NOT bondable to porcelain. Easy Polishing. We have brought this raw cut ingot in todays market due to the fact of having you save $$$ money. Buy more and save! Non-precious yellow golden alloys are a very common material when todays precious metals are reaching record costs. These raw cut ingots become melted and casted in varioususes in todays practice! As mentioned: Used for full metal casting, Inlays, On lays, Partials, and Full Crown and Bridges, and non precious jewelry casting. See our photo on a fully finished and polished Bridge! The results are of course user per user, we require at minimum someone who has experience with casting in order to purchase. ATTENTION: This listing is for 15 ounces of Alloys Per quantity of 1 Choose the quantity you need and we will provide free next business day shipping. You see a great deal from a competitor but still want to buy through us, send us an offer and you will get a genuine USA made material from a manufacturer/supplier that’s been around since the early 1980’s. Why buy a product that’s not only made in the USA but also has integrity? DISCLAIMER: Techniques vary person to person, so included with this when purchased is a Physical and Mechanical Property Note also showing composition, the user, has already been accommodated in understanding how to use this product. This product is for professional use only. Properties and finished results can vary depending on user experience and casting procedures. It is best advised to use general casting techniques that any brand raw material will accommodate to, as this raw cut ingot material will follow and is no different other than its raw cut ingot form.Non Precious Yellow Casting Alloy InformationPHYSICAL PROPERITES CU: 85% NI: 4% AL: 10% FE: 1%MELTING RANGE: 970°C to 1040°CCasting Temperature: 1950 °CAlloy Color: Yellow (Golden) Color MECHANICAL PROPERTIESVickers Hardness: 138 CastTensile Strength Cast: 90,000 PSIYielding Strength Cast: 40,000 PSIElongation %: 15-20%Modulus of Elasticity: 16 X 10-6 PSI - For Professional Use Only - - Keep Out of Reach of Children - Caution: Adequate ventilation is required during grinding to avoid any potential health hazard. When melting, grinding, and polishing, use adequate local and general ventilation. DO NOT recirculate exhaust air back into work area. always use appropriate clothing, masks and etc. as required. Dust/Fumes are toxic. -Unbeatable Pricing & Quality--Made in the USA- These products and or materials are to be used solely under appropriate and trained individuals who understand to use caution and safety ( goggles, masks, gloves, and or any other type of protection ) while using our products. Please be aware of this and always keep away from reach of children. Seek immediate help if you were unable to comply by these terms. *Thank You For Viewing* TERMS OF SALE Once you have selected your amount and or size interested in, you, the purchaser and users are 100 percent responsible and 100 percent liable of this material to use it in a safe and appropriate manner to self and for others as also for its intended purposes with full understanding of what the product consists of. In no event shall Benjamin Manufacturing & Supply be liable and or responsible for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of our products, materials and or supplies.We accept PayPal , MasterCard , Visa , American Express, Discover and others provided by eBay. After you've made your purchase, you will receive your tracking number within 1-2 business days. For international Sales, eBay Global Shipping has you covered as well! PRICING"UNBEATABLE PRICES!" We make every effort to keep our prices low, extending the benefit to you, the consumer. We guarantee the lowest prices, often providing discounts up to 50% off of retail prices. We will often offer special discounts throughout the year. SHIPPING INFORMATIONOnce payment is received, your selected amount will then be shipped USPS same day or next business day, please give 1-3 days for shipping once payment received on majority of areas in the United States.TERMS OF CONDITIONS, POLICIES & PURCHASER LIABILITY & DISCLAIMERSBy accessing and purchasing through using our eBay Store, you are automatically upon purchase agreeing to be bound by all Terms and Conditions of Use, agreeing to all Disclaimers, agreeing to all Policies, agreeing to be 100 percent safe and cautious to self and others with the appropriate safety gear and equipment when using all of our materials, supplies or products, following all applicable laws of regulatory regulations, and agreeing that you are 100 percent responsible and you, the consumer, purchaser and or buyer are 100 percent liable for compliance of all information shown here. If you do not agree with any of these terms & conditions, disclaimers, policies and etc. below, you are prohibited from purchasing through our eBay store listing(s). The materials, products & supplies appearing on our eBay store could include photographic, typographical, or technical errors. Benjamin Manufacturing & Supply doesn't warrant that any of the materials, products & supplies on its web site or eBay store listings are accurate, complete, or current. Benjamin Manufacturing & Supply does not undertake to update or correct such information and reserves the right to modify, delete and rearrange any or all of the contents of this eBay store at any time without notice to you. In addition, Benjamin Manufacturing & Supply does not, however, make any commitment to update the materials, products & supplies and disclaims any liability and disclaims any responsibility for such errors. Benjamin Manufacturing & Supply disclaims all liability and all responsibility relating to the use or installation of all our materials, products & supplies since this is beyond Benjamin Manufacturing & Supplies control. Safety for others is crucial for our business, and for such materials to be tested for safety purposes are exempt since they are itself, a material, and not a finished product. Therefore though, any material is still tested keep in mind to such degree before leaving our premises also. Any finished product or supply sold here is tested and ensured to our best of ability as well before leaving our premises to make sure any defects of any matter. We are a company of quality over quantity therefore we are a small business with a limited amount of materials, supplies and products. Judgments as to the suitability of information herein for purchaser's purposes are necessarily purchaser's or user(s) 100 responsibility and purchaser(s) or user(s) 100 liability. Therefore reasonable care has been taken in the preparation of such information. The accuracy or suitability of such information for applications of products, supplies and or materials to purchaser's intended purposes or for consequences of its use is solely the purchasers full 100 percent responsibility & 100 percent liability and 0 percent responsibility & 0 percent liability of Benjamin Manufacturing & Supply so please purchase carefully and understand these materials, supplies and or products are to be used ONLY for their intended purposes and under full care and full safety to self and others involved.By purchasing through our eBay Store, you the purchaser(s) or user(s) of our materials, products and or supplies automatically agree to defend, indemnify, and hold harmless Benjamin Manufacturing & Supply and its subsidiaries, affiliates, owner(s), parents, and their respective agents, anyone in relation to, employees, suppliers, officers, manufacturers, vendors, contractors, directors, successors and assigns from all liabilities, all claims, all damages, and all expenses, including without limitation all attorneys’ fees and costs that arise from your use of our products, supplies and or materials, misuse of this site or use of any software application and or purchases associated with the use of this Website and or eBay Store listing. Disclaimer: Benjamin Manufacturing & Supply is 100 percent NOT liable and 100 percent NOT responsible for any property damages anywhere, bodily injuries to anyone, wrong doing, fatal harm and or incorrect use of these products, materials & supplies sold to users or purchaser(s). ALL Products, ALL Materials and ALL Supplies are SOLD AS IS with ZERO WARRANTIES of any kind and is the purchaser(s) and or user(s) full responsibility to use any product, material and or supply in a professional and safe manner. It is a shame we have to explain these things since common sense is not that common... These products, materials & supplies are to be used solely under appropriate and trained individuals who understand to use caution and safety ( goggles, masks, gloves, and any other type of protection applicable ) while using our products, materials and supplies. Please be aware of this and always keep away from reach of children. Seek immediate help if you were unable to comply by these terms of conditions, disclaimers, policies and regulatory requirements. Images are provided for illustrative purposes only and may not reflect the actual packaging, contents, color, etc of the listed item. Users should refer to the product description for the product packaging or contact before purchasing of any questions needed to ensure safety, satisfaction and optimal use of product(s).REGULATORY REQUIREMENTSLocal regulatory requirements may apply to use or installation of certain products. Be sure to understand and comply with any such requirements prior to purchase, use, or installation of products . RETURN POLICY ALL RETURNS REQUIRE PRIOR RETURN AUTHORIZATION Via eBay. The following conditions must be complied with for all returns:Return shipping costs are the responsibility of the customer. These Items must be returned within 30 days of purchase.All products must be returned complete with all accessories and instructions sheets (if applicable), in the original packaging and in sale-able condition.A copy of the original invoice and reason for the return must accompany all returns.Products MUST be returned within 30 days of purchase, otherwise a 20% restocking fee may apply.Products CANNOT be returned after 30 days of purchase.Used merchandise or equipment may not be returned for credit- Please verify you received what you had ordered before use!Returns must be sent via a traceable carrier (UPS or USPS) with a viable tracking number. ITEMS NOT RETURNABLE FOR CREDIT:TeethHazardous itemsPowders of any form items that cannot be returned to vendor (including discontinued items)Special order items (Items that are custom ordered) ABOUT USBenjamin Manufacturing & Supply has been in business since the 1980s. We are a small business. The Founder, Joseph K. Benjamin has had decades of dental experience in his lifetime to begin this business as well as owning a Dental Laboratory practice. He has worked in many different countries growing up around all types of dentistry and settled in South Western Pennsylvania to further pursue his dental practices with his family by his side by the mid 90s. Benjamin Manufacturing & Supply supplies to Crown & Bridge Labs, Partial Labs, Orthodontists, Denture Labs, Dentists, Jewelers, and many other businesses and consumers throughout the entire USA, Canada and over seas. If you do not find what you are looking for on our website please feel free to contact us, it will be our pleasure to assist! Thank You For Viewing

Price: 155 USD

Location: Jeannette, Pennsylvania

End Time: 2024-12-02T20:27:24.000Z

Shipping Cost: 0 USD