1x10 TRM extension guitar cabinet 110 Deluxe convertible back 12" deep

Description: TRM 110 1 x 10 extension guitar speaker cabinet deluxe with convertible back. Full 12" deep. Beautiful no-knot eastern white pine with halfblind dovetailed corners. Finished in a glossy handrubbed polyurethane finish with oxblood w/stripe grill cloth, Fender style brown dogbone handle, rubber cab feet, wired and ready to load with your speaker. PLEASE NOTE: We don't have a warehouse so, these are custom made to order cabinets meticulously handcrafted one at a time in our New Hampshire wood shop. Please allow 30 business days for your cabinet to be professionally built. Now a full 12" deep. I have found that 12" depth is the sweet spot for pine cabinets. Other builders charge extra for this feature or may not do it at all. We use a generations old furniture building technique of reversing the grain on alternating boards when joining. This stiffens the pine shell panels for a more tightly focused lowend without the boominess of a single wide board. This is a more laborious method but, well worth it for the improved tone. If you'd like a cabinet with less oomph and a looser lowend I can build 10" to 10-1/2" deep cabs from a single wide board as well. Let me know. WHAT IS IT? This is an unloaded TRM guitarcabs 1 x 10 cabinet. Dimensions are 18" wide x 16" high x 12" deep. CONSTRUCTION: These are made from 3/4" select eastern white pine with reinforced halfblind dovetailed corners. Edges have a 1/2" radiused round over. Tee-nuts are pressed into the baffle and includes the machine screws for speaker mounting. Fits Celestion, Eminence, Jensen, Weber, WGS, and most other brands. All wired up with a 1/4"jack and wiring. BAFFLE AND REAR PANEL: Baffle and rear panel are rigid 1/2" voidless birch plywood. Rear panel is a 3 - piece convertible design that allows you to use the cab as opened back or closed back. Utilizes the Fender blackface era style rear loading baffle design. SHIPPING: Ships via USPS with insurance. FEATURES: - 12" deep for full fat tone. - Select 3/4" pine with dovetailed corners. - Rigid 1/2" voidless birch baffle and rear panel. - 3 piece convertible rear panel. - Speaker mounting tee-nuts are pressed in and machine screws included. - Presoldered 1/4" jack and dish. Ready to load. - 18" wide x 16" high x 12" deep. - Average weight is around 19 lbs. WHY PINE? Pine is a lightweight and resonant wood that was used in lots of early Fender amps and cabinets. Pine gives a slightly warmer top end and beefier low mids. Another advantage is its light weight. I've been in various wood working businesses for over 30 years and have been building speaker cabinets since 1999. I've sold quite a few on ebay too. Check my feedbacks. I'll be happy to answer any and all questions and can also do custom builds. Thanks, Tim from trmguitarcabs.

Price: 299.95 USD

Location: Bristol, New Hampshire

End Time: 2024-01-20T02:42:02.000Z

Shipping Cost: N/A USD