ANYCUBIC Wash and Cure 3.0 Large 4L LCD Models 2 in 1 Washing and Curing Station

Description: Main FeaturesLarger Size for Upgraded CapacityCompared to Anycubic Wash & Cure 2.0, the Anycubic Wash & Cure 3 has an impressive 100% increase in cleaning basket capacity, now at 3 liters. The total volume of the cleaning bucket has been expanded to 4 liters. This makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less.The curing size has increased by 15%, up to 160*180 millimeters, to accommodate larger and more models for single post-processing session.Localized Strengthening, Uniform CuringThe "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments.By adopting a brand new arrangement of light beads and lens light source, Anycubic Wash & Cure 3's curing uniformity has been enhanced by 20% compared to its predecessor 2.0. This results in a more thorough and comprehensive curing of the entire model.Dual-layer Design, IPA SavingThe double-layered PP material cleaning basket is designed to support simultaneous cleaning with the platform. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design maximizes the efficiency of IPA usage.Simple Operation, Quiet and EfficientCleaning and curing dual modes, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Infinite rotary knob control, adjustable from 1 to 30 minutes at will.Through a more sealed structural design and software optimization, the noise interference generated during cleaning and curing is reduced[1], creating a quieter and more comfortable working environment.[1] Measured by Anycubic Laboratory the maximum sound < 65dB in the operating state of the machine.Models DisplayTech SpecsIn The BoxPaymentDelivery detailsTerms of salesAbout usContactPayment1.We accept Paypal,Google Pay,CreditCard,Visa,MasterCard,etc.2.Payment must be within 8 days after you ordered the item.Delivery details1.We cannot arrange shipments on weekend or public holidays.2.Your orders will be shipped out within 1-2 business days after payment received.3.If there is any question about delivery details,please contact us, we're alwasys at your service. Terms of sales1.The returns should be returned with our original packages. 2.Defective products must be returned within 30 days. 3.Customers must contact us first for the return address. 4.In all cases, buyers pay for the shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. 5.Please kindly feel free to contact us first, if you receive the items with quality problems or damaged, we would like to offer replacement or refund service for you. About us Who are we? Founded in 2015, Anycubic has become one of the most popular 3D printer brands in the market, with around 300 employees based in China.But, we didn’t start fancy as it seems to look today."Graduated in 2015, I came back to China from New Zealand. I was so excited and full of curiosity when landed in Shenzhen the first time”, James , co-founder of Anycubic and a Ph.D of University of Auckland said. "Lu Ouyang, Anycubic’s Founder and CEO, is my childhood friend. He had a company before Anycubic providing electronic modules and 3D printer accessories for over 4 years.3D printer itself wasn’t our first choice. We hadn’t even had the confidence to rush in. But after seeing clients increasingly relying on us for key components of their DIY printers, We realized we could do it, and do it much better.”“I didn’t think much but only hope to explore more possibilities with the 3D printing technology. There is nothing to be afraid of. So why not make a difference.” Ouyang added. In 2015, Anycubic was founded, without much hesitation. “Following our heart is important. But the real world is harsh. There were so many up and downs. We cannot remember how many sleepless nights out there at the early stage.” Anycubic founders said. After a whole year’s hard work, the 1st model Anycubic Mega came on board in2016. Fortunately our work paid off. Mega became so popular in the market in a short period of time and our journey as a professional 3D printer maker officially started. We all were amazed and excited but we did not stop there. The second and third generations were launched soon after along the way..Indeed, 3D printing technologies can do a lot. But first of all we believe 3D printers should be accessible and affordable to all instead of being rocket science and beyond budget. We believe each one of us deserves the freedom to make our ideas, creativity and imagination a reality. Anycubic is committed to being one of the best choices for freedom to make. 3Dream, for freedom to make, Side by side with you, we know we will make it. For Freedom to Make 3D Printing Education Incubation Project Inspired by Anycubic' s vision — "For Freedom to Make" — the project is the company' s 3D printing education incubator founded in Shenzhen on September 2, 2020. It demonstrates Anycubic' s aspiration of helping everyone achieve the freedom of creation and invention using 3D printing technologies. Deemed Anycubic' s first high-tech 3D printing incubator, the project aims to support 3D printing basic research and training, and create a 3D printing education ecological circle to encourage more people to explore the applications of 3D printing in different areas. Support will include 3D printing products, printing services and consultancy, among others. Incubated partners will hail from various sectors including but not limited to universities, research institutes, and enterprises. This project indicates Anycubic's perseverance in exploring the 3D printing world and boosting the development of innovation in the economy and society. Addressing the barriers to STEM education will require a collective effort from both institutions and 3D providers, in which we leverage effectively our resources to initiate four 3D printing camps this summer. The first camp ceremony was held at Yale School of Engineering and Applied Science on April 23 followed by 3 online boot camps known as "ANYCUBIC X Yale Funbotics 3D Modeling and Printing Camp". Guided by Yale mentors, in all boot camps, the students will learn about the inner workings of 3D printers and how to 3D model as well as 3D print their creations. The Bigger Picture with Education Incubation Project Promoting 3D printing education and research is a marathon not a sprint. The partnership with Yale Funbotics is Anycubic' s first port of call and the company will continue to work hard to sponsor cooperation with more global universities, research institutes, enterprises, and academic organizations of a global nature and help them achieve success in exploring the world. Contact us via ebay Contact1.Your Positive feedback will be an encouragement for us to offer the better quality and the better service in future.2.If you are not satisfied with them, please contact us first via Contact Seller. Your messages will be answered within 18 Hours.3.We shall try our best to solve your problem to your satisfaction.On Dec 14, 2023 at 19:19:47 PST, seller added the following information:

Price: 89 USD

Location: NJ/CA

End Time: 2024-02-02T13:01:42.000Z

Shipping Cost: N/A USD