Description: PLEASE READ DESCRIPTION THOROUGHLY and LOOK AT THE PHOTOS This sale is for a new can motor flywheel upgrade kit for Hobbytown cab units FA, F7, E7, PA, and Shark Nose diesels. This motor will replace the Pittman DC70 or DC90 open frame motors. This motor has very high torque, it is designed for cordless drill service, and it has plenty of power for Hobbytown multi-drive setups. PLEASE NOTE: THIS MOTOR KIT WILL NOT FIT IN HOBBYTOWN HOOD UNIT CHASSIS OR RS3 RSD4 ROAD SWITCHER CHASSIS OR YARD SWITCHER CHASSIS. iF YOU NEED A MOTOR KIT FOR OTHER HOBBYTOWN DIESELS, PLEASE SEE MY OTHER AUCTIONS. If you have any questions, please contact me before purchasing this kit. This may save you the hassle of returning the kit. This motor measures 38mm long and 28mm in diameter, it will fit inside the body of any vintage Hobbytown cab unit diesel. With no load at 12 volts DC this motor draws 170ma and develops 9300 rpm, the stall current is 2.7 amps. This motor has a 5 pole armature, and it will start turning smoothly on 1 volt DC. This motor is DCC compatible with a high current decoder. There are 2 solder terminals on the rear of the motor for electrical connections. The motor shaft is 13mm long and 2.3mm in diameter. The flywheel is 3/4 inch in diameter and 1/2 inch long. The flywheel shaft is 3/32 inch in diameter and 3/4 inch long. This motor kit is designed to use the existing Hobbytown universal couplings. The Hobbytown universal couplings ARE NOT included with the motor kit. If you have any questions, please contact me before purchasing this kit. This kit is easy to install, installation time is about 2 hours. The motor kit consists of 1 can motor, 1 flywheel and shaft, hook up wire, and illustrated installation instructions. The photo shows what the motor kit would look like installed on a Hobbytown E7 chassis. PLEASE NOTE! The chassis shown in the photo IS NOT included with the motor kit. The 2nd photo shows the contents of the motor kit. This is an unassembled kit. Note to international buyers: eBay determines the rates for international shipping, not me. I have no control over what eBay charges for international shipping. Thanks for looking.
Price: 28.95 USD
Location: Prescott Valley, Arizona
End Time: 2024-11-29T20:12:43.000Z
Shipping Cost: 6.75 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Features: DCC compatible, Not Painted
Control System: Analog
Gauge: HO
MPN: Does Not Apply
Rail System: 2-Rail-2-Conductor
Power Type: DC
Item Width: 28mm
Control: Analog
Assembly Status: Unassembled Kit
Item Length: 38mm
Vintage: No
Country/Region of Manufacture: United States
Material: Pressed Steel and brass
State of Assembly: Unassembled Kit
Scale: H0
Year Manufactured: 2024
Year: 2024
Grade: C-10 Mint-Brand New
Grading: C-10 Mint-Brand New
Vintage (Y/N): No
Brand: Chino Backshops
Color: Unpainted
Power Supply: DC
Type: Can motor flywheel kit
