INTERTOOL Pro Expanding Spray Foam Insulation Gun, PU Applicator PT08-0605

Description: [Reusable Foam Adhesive Dispenser]: Easy to use, durable foam dispensing gun ideal for application of polyurethane insulation or sealant foam. Foam remains pressurized and uncured in gun for up to 30 days when stored with foam canister attached and flow control knob closed. Requires thorough cleaning when canister is removed[Easy Clean Material]: PTFE non-stick coated basket connector, tip, and internal needle protect the most vital parts of the gun from foam hardening and making it easy to clean or wipe off after use. 4 tip attachments for further customization and reach[Twist-on Can Compatible]: Gun intended for use with twist-on foam sealant and cleaner cans, such as Great Stuff Pro 24oz screw-on canisters. NOT for use with straw or tube tipped canisters[Less Mess and Wasted Foam]: Dispenses only the amount you need and reduces foam waste and overspray. Includes ergonomic and advanced flow control knob for adjustable bead size and precise dispensing[INTERTOOL has YOU Covered]: We are always available to quickly resolve any issue and answer to your needs. Our community is our #1 priority The INTERTOOL Foam Gun Applicator PT-0605 effectively applies sealant with full and precise user control at a greater yield. Designed to be easily managed with a smooth trigger and flow control knob that promotes unrestricted flow while saving you money on wasted straw foam cans. ABS Plastic handle ensures a steady grip, and is suitable for time enduring, stress free application. Built to last with wear-resistant and durable component materials that are easy to clean. Easily take care of unwanted voids, cracks, and breaches. The INTERTOOL Expanding Foam Gun PT-0605 is ideal for contractors and DIY enthusiasts.Compatibility:Supports most foam sealant and cleaner twist canisters such as AdvanTech and Great Stuff Pro Gaps & Cracks, Window & Door, Wall & Floor Construction Adhesive, and CleanerMaterial:Body & Connector / Holder: AluminumBarrel & Needle: Stainless SteelTip: CopperHandle: ABS PlasticHow to use the INTERTOOL Foam Sealant Gun PT-0605:1) Retrieve a compatible sealant twist/screw canister. Do NOT use with straw or tube tipped canisters. Ensure to wear the proper safety equipment according to the foam canister’s instructions2) Shake the canister as instructed on the foam canister for a thorough mixture and remove the canister cover3) Ensure that the gun’s flow control knob is in the closed position by turning the knob all the way in a clockwise direction4) Place the canister in an upright position on a stable surface. Align the foam gun’s canister connection point with the thread on the top of the upright canister and tighten. Note: screw until finger-tight; do not over-tighten5) The foam gun is now ready for use. Grip the foam gun, point at a test surface, and gently squeeze the trigger while activating the flow control knob by twisting it counter-clockwise until the desired bead size / flow amount is reached6) Once the desired bead size / flow amount is reached, place the tip of the gun against the objective and slowly apply pressure to the trigger to begin the foam application7) When finished, twist the control knob clockwise until closed. The foam gun can be left attached to the canister with the canister stored right side up for up to 30 days, or as specified on the foam canister instructions. Ensure to close the flow control knob when stored. The canister can also be removed and compatible cleaning solution should be applied promptly to remove any residual foam left in or on the gun8) Ensure to run cleaning solution through the gun until no further foam residue remains. Remove cleaning solution can after cleaning. Foam gun can be re-used with the same canister or a new canisterUse Caution:Only point foam gun towards the project objectiveRecommended careful cleaning and maintenance for consistent product resultsStore safely out of reach of children

Price: 25.99 USD

Location: Klamath Falls, Oregon

End Time: 2024-08-30T10:18:02.000Z

Shipping Cost: 0 USD