Description: Midnite Solar MNHAWKE’S BAY 120 Hawke's Bay 600VDC MPPT Charge Controller 120A *Hawke's Bay Breaker Box pictured in the second image is sold separately Description: The Midnite Solar Hawke's Bay (MNHAWKE’S BAY 90) 600VDC MPPT Charge Controller 120A is the least expensive large output 600VDC MPPT charge controller either by itself or when outfitted with options! The new built in talking MNGP2 graphics and programming module allows communication, monitoring and programming of all future MidNite products from a single unit. The rotary dial provides easy access to all menus and devices on network as well as the selection of custom programming within the various sub-menus. Options sold separate: Hawke's Bay Breaker Box, MNSPD-115 and MNSPD-600 (MNSPD-115 for Battery Side and MNSPD-600 for the PV Input Side) FEATURES: Charges Lithium, Flooded Lead Acid, AGM and virtually any other chemistry.600 operating voltageMax current out: 120 amps185 to 585 volts dc operating range3 Aux I/OsRemote Voltage senseBlue Tooth connectivity standardETL listed to UL1741 and CSAType 1 environmental ratingTerminals are rated for 75 CNew larger display with rotary knob for easier navigation of menus48 Volt battery onlyOptional plug in Arc Fault, 2020 compliant ground fault and Rapid Shut down modulesSolar, wind and hydro MPPT modes Specifications: Nominal Battery Voltage: 48VMax Output Current: 90 or 120 amps depending on model PV Open Circuit Voltage VOC: 600VDCPower Conversion Efficiency: 98% (Typical system)Arc Fault and NEC 2020 Ground Fault Protection: Optional plugin modules - user installedCharging Regulation: Bulk, Absorb, Float as well as EqualizationBattery Voltage Regulation Set Points: 40V to 65VEqualization Charging: Adjustable voltage and durationBattery Over Voltage: Fully protected (The optional Hawke's Bay Breaker Box automatically trips PV input breaker if battery exceeds 68VDC)Battery Short Circuit: Fully ProtectedBattery Temp Compensation: Automatic when BTS is installed. Adjustable mV per degree Cper 2V cellProgrammable Auxiliary: 3 auxiliary inputs/outputsGraphic Display: MNGP2 - 64 x 122Stacking cables for system networking: Standard CAT5 - CanbusCommunications: CanbusRemote Display: MNGP2 can be relocated and a second display can be addedExternal Monitoring: Phone Application software allows local monitoring within normal blue tooth range from Hawke's Bay.Terminal Rating: 75CData Logging: 380 days of daily historyWind and Hydro Applications: Coming soon (firmware up-gradable) Positive Ground Applications: Requires 2 pole input and output breakersOperating Temperatures: Minimum of -40C to 50C (controller will auto derate as temperature rises above 25C)Environmental Rating: Indoor Type 1Warranty: 5 Years Weight and Dimensions:17-5/8" x 9" x 8-1/8" 23 lbsShipping Dimensions: 23" 15.05" x 11.05" Certifications: Listed by ETL for US (NOT LISTED FOR USE IN CANADA) To ensure proper start up and MPPT operation, the minimum initial PV input voltage should be at least 30% higher than the highest expected battery voltage. Ships with MidNite Battery Temperature Sensor (MNBTS) and printed Manual. Warranty - 5 yrs Made in the USA California Residents: California Proposition 65 Warning
Price: 1399 USD
Location: Roanoke, Virginia
End Time: 2024-08-05T21:14:26.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Midnite Solar
Type: MPPT Charge Controller
System Configuration: Off-Grid
Power Source: Solar
Model: MNHAWKE’S BAY 120
Features: Automatic Voltage Detection, LCD Display, Temperature Sensor
MPN: MNHAWKE’S BAY 120
Charging Mode: MPPT (Maximum Power Point Tracking)
Application: Agriculture/Farming, Aquaculture, Back-up Power, Commercial, Electronics, Home/Garden, Irrigation