Midnite Solar MNPV3 (PV3 Combiner Box Only) Solar Wind Turbine Wind Generator

Description: MidNite Solar MNPV3 PV Combiner Box(PV3 combiner box only) MidNite Solar MNPV3 PV Combiner *** THIS IS THE COMBINER BOX ONLY....THE BREAKERS AND FUSE HOLDERS ARE SOLD SEPARATELY The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as: Aluminum rain proof type 3R enclosureInternal plastic injection molded dead front coverKnock outs for lightning arrestorsKnock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectorsUses 150VDC & 300VDC breakers or 1000VDC fuses depending on model numberETL listed to UL1741 for use in the US and Canada Adaptable for two separate inverters or charge controllers on certain models Description: Enclosure Only (For 150 VDC charge controllers and 600 VDC grid tie inverters) Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV) breakers or two 600 VDC fuse holders. Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar. Photos show MNPV3 with either breakers or fuses (Breakers/fuse holders sold separately) Type 3R environmental ratingWarranty - 5 yrs.Listed by ETL for US & CanadaMade in the USA MidNite Solar MNPV3 Combiner Specifications: Enclosure rating: Outdoor Rainproof Type 3REnclosure material: Powder coated aluminum with stainless hardwareMounting options and angle: Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch)Number of PV strings: Three strings using breakers up to 150 volts or two strings using fuses up to 600 voltsMaximum number of output circuits: 1 for all Wire range for string input: 14-6 AWGOCPD Included: NoMaximum OCPD rating: 30 amp with fuses and 63 amps with 150 volt breakersMaximum outputamps: 60 amps for allOutput wire range: 14 to 1/0 AWGLug temperature rating: 90 deg CDeadfront: Custom molded plastic deadfrontLockable: YesRating: UL1741 MNPV3 Combiner Dimensions: Size: 10.5"L x 4.5"W x 3.5"DShipping: 11"L x 5"W x 4"DWeight: 2 Lbs Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!MidNite Solar MNPV3 PV Combiner The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as: ---Aluminum rain proof type 3R enclosure ---Internal plastic injection molded dead front cover ---Knock outs for lightning arrestors ---Knock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectors ---Uses 150VDC & 300VDC breakers or 1000VDC fuses depending on model number ---ETL listed to UL1741 for use in the US and Canada --- Adaptable for two separate inverters or charge controllers on certain models Description: Enclosure Only (For 150 VDC charge controllers and 600 VDC grid tie inverters) Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV) breakers or two 600 VDC fuse holders. Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar. Photos show MNPV3 with either breakers or fuses. Breakers/fuse holders sold separately. ---· Type 3R environmental rating ---· [Warranty - 5 yrs.] (http://www.midnitesolar.com/pdfs/MIDNITE_SOLAR_INC_Warranty.pdf) ---· Listed by ETL for US & Canada ---· Made in the USA MidNite Solar MNPV3 Combiner Specifications: Enclosure rating: Outdoor Rainproof Type 3R Enclosure material: Powder coated aluminum with stainless hardware Mounting options and angle: Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch) Number of PV strings: Three strings using breakers up to 150 volts or two strings using fuses up to 600 volts Maximum number of output circuits: 1 for all Wire range for string input: 14-6 AWG OCPD Included: No Maximum OCPD rating: 30 amp with fuses and 63 amps with 150 volt breakers Maximum outputamps: 60 amps for all Output wire range: 14 to 1/0 AWG Lug temperature rating: 90 deg C Deadfront: Custom molded plastic deadfront Lockable: Yes Rating: UL1741 MNPV3 Combiner Dimensions: Size: 10.5"L x 4.5"W x 3.5"D Shipping: 11"L x 5"W x 4"D Weight: 2 Lbs MidNite Solar MNPV3 PV Combiner MidNite Solar MNPV3 PV Combiner The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as: Aluminum rain proof type 3R enclosureInternal plastic injection molded dead front coverKnock outs for lightning arrestorsKnock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectorsUses 150VDC & 300VDC breakers or 1000VDC fuses depending on model numberETL listed to UL1741 for use in the US and Canada Adaptable for two separate inverters or charge controllers on certain models Description: Enclosure Only (For 150 VDC charge controllers and 600 VDC grid tie inverters) Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV) breakers or two 600 VDC fuse holders. Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar. Photos show MNPV3 with either breakers or fuses. Breakers/fuse holders sold separately. · Type 3R environmental rating· Warranty - 5 yrs.· Listed by ETL for US & Canada· Made in the USA MidNite Solar MNPV3 Combiner Specifications: Enclosure rating: Outdoor Rainproof Type 3REnclosure material: Powder coated aluminum with stainless hardware Mounting options and angle: Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch) Number of PV strings: Three strings using breakers up to 150 volts or two strings using fuses up to 600 volts Maximum number of output circuits: 1 for all Wire range for string input: 14-6 AWG OCPD Included: No Maximum OCPD rating: 30 amp with fuses and 63 amps with 150 volt breakers Maximum outputamps: 60 amps for all Output wire range: 14 to 1/0 AWG Lug temperature rating: 90 deg C Deadfront: Custom molded plastic deadfront Lockable: Yes Rating: UL1741 MNPV3 Combiner Dimensions: Size: 10.5"L x 4.5"W x 3.5"DShipping: 11"L x 5"W x 4"D Weight: 2 Lbs Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! MidNite Solar MNPV3 PV Combiner The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as: Aluminum rain proof type 3R enclosureInternal plastic injection molded dead front coverKnock outs for lightning arrestorsKnock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectorsUses 150VDC & 300VDC breakers or 1000VDC fuses depending on model numberETL listed to UL1741 for use in the US and Canada Adaptable for two separate inverters or charge controllers on certain models Description: Enclosure Only (For 150 VDC charge controllers and 600 VDC grid tie inverters) Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV) breakers or two 600 VDC fuse holders. Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar. Photos show MNPV3 with either breakers or fuses. Breakers/fuse holders sold separately. · Type 3R environmental rating· Warranty - 5 yrs.· Listed by ETL for US & Canada· Made in the USA MidNite Solar MNPV3 Combiner Specifications: Enclosure rating: Outdoor Rainproof Type 3REnclosure material: Powder coated aluminum with stainless hardware Mounting options and angle: Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch) Number of PV strings: Three strings using breakers up to 150 volts or two strings using fuses up to 600 volts Maximum number of output circuits: 1 for all Wire range for string input: 14-6 AWG OCPD Included: No Maximum OCPD rating: 30 amp with fuses and 63 amps with 150 volt breakers Maximum outputamps: 60 amps for all Output wire range: 14 to 1/0 AWG Lug temperature rating: 90 deg C Deadfront: Custom molded plastic deadfront Lockable: Yes Rating: UL1741 MNPV3 Combiner Dimensions: Size: 10.5"L x 4.5"W x 3.5"DShipping: 11"L x 5"W x 4"D Weight: 2 Lbs

Price: 109.8 USD

Location: Roanoke, Virginia

End Time: 2024-03-02T20:17:13.000Z

Shipping Cost: N/A USD