MT3 Rear Add ON accessory MT3AOU fits NEW Universal Lathe Mount holders

Description: New Universal Mount Product Line for 2024. This New Universal Mount System is designed to fit a standard 1-1/2" x 1-1/2" x 1/8" angle bar (Not Included). The angle bars are available at most hardware stores and can be mounted on top of the lathe backsplash or on a wall using some angle brackets. The holders will snap in at the bottom and can be snapped together on the sides with the included snap rings. The snap rings are not needed but are included for maximum stability. The QC holders are threaded 1/4-20 to use a screw for a wrench holder if desired. Also threaded 1/4-20 on rear for set screws but should not be needed. The Tool bit holders and MT holders are dovetailed on the back for other accessories. MT2 Rear Add On accessory, fits back side dovetail on MT and other tooling holders. Made in U.S.A. (Tooling not included) Add a Morse Taper holder to the rear accessory dovetail of other universal mount tooling holders. (1) MT3AOU = MT3 Add On accessory, slides into rear dovetail of other holders (Most Items ship the same or next business day, but being a new product, please allow up to 5 business days to ship.) I do combine shipping on multiple items. You can order everything you need and just pay one payment for all items plus combined shipping. Request an invoice if it does not combine automatically. See photos (will update photos when I have a chance) These are very strong 3D printed parts currently offered in Matte BLACK. Other Available Tool Holders and descriptions.BIN1U = Bin with 3 drawers 120mm x 100mm x 80mm outside dimensions BIN2U = Bin with 3 drawers 120mm x 60mm x 80mm outside dimensions HKM = Hex Key holder for metric and inch, slides into rear dovetail of other holdersCH1 = Caliper Holder. Slides into the rear dovetail of other holders.MTD3 = Morris Taper Drift holder for MT3-4 drift. Slides into the rear dovetail of MT holders.BBH1 = Boring Bar Holder for 7, 8, 10, 12mm boring bar set. Slides into the rear dovetail of other holders. SPCR1U = Spacer for adding with to OXA, AXA, BXA, CXA, and CA holders. (For wider holder) TBH38Us = Tool bit holder short 3/8" x 3/8" holes x 1" deep, Holds HSS short tool bits. With rear dovetail aux mount.TBH12Us = Tool bit holder short 1/2" x 1/2" holes x 1" deep, Holds HSS short tool bits. With rear dovetail aux mount.TBH58Us = Tool bit holder short 5/8" x 5/8" holes x 1" deep, Holds HSS short tool bits. With rear dovetail aux mount.TBH38U = Tool bit holder 3/8" x 3/8" holes x 2" deep, Holds HSS tool bits. With rear dovetail aux mount.TBH12U = Tool bit holder 1/2" x 1/2" holes x 2" deep, Holds HSS tool bits. With rear dovetail aux mount. TBH58U = Tool bit holder 5/8'' x 5/8" holes x 2" deep. Holds 5/8" insert tool holders. With rear dovetail aux mount.TH1U = Chuck Key Tee Handle hanger. Hangs chuck key above and a little behind the other tools. MT22U = Morse taper #2 double stack holder with holes for chuck keys. With rear dovetail aux mount.MT33U = Morse taper #3 double stack holder with holes for chuck keys. With rear dovetail aux mount.MT44U = Morse taper #4 double stack holder with holes for chuck keys. With rear dovetail aux mount.OXAU = Quick change tool holder. Holds OXA and 000 series quick change tools.OXALU = Quick change tool holder left hand for facing and boring. Holds OXA and 000 series quick change tools.AXAU = Quick change tool holder. Holds AXA and 100 series quick change tools.AXALU = Quick change tool holder left hand for facing and boring. Holds AXA and 100 series quick change tools.BXAU = Quick change tool holder. Holds BXA and 200 series quick change tools.BXALU = Quick change tool holder left hand for facing and boring. Holds BXA and 200 series quick change tools.CXAU = Quick change tool holder. Holds CXA and 300 series quick change tools.CXALU = Quick change tool holder left hand for facing and boring. Holds CXA and 300 series quick change tools.CAU = Quick change tool holder. Holds CA and 400 series quick change tools.CALU = Quick change tool holder left hand for facing and boring. Holds CA and 400 series quick change tools.MT2AOU = MT2 Add On accessory, slides into rear dovetail of other holdersMT3AOU = MT3 Add On accessory, slides into rear dovetail of other holdersMT4AOU = MT4 Add On accessory, slides into rear dovetail of other holdersMT5AOU = MT5 Add On accessory, slides into rear dovetail of other holders Look at my other listings for other tool holders.

Price: 5 USD

Location: Kansas City, Kansas

End Time: 2024-04-03T21:28:24.000Z

Shipping Cost: N/A USD