Unique 5C Collet Stop, w/8 different size stop pins

Description: V-Mar Racing eBay store V-Mar 5C Collet Stop We have designed what we feel is the best 5C collet stop available. Most of the collet stops on the market use a threaded rod for the work piece to bottom against. This is very slow to adjust and expensive if you need to make different size stops. Our collet stop uses simple 3/8" rod. Easy to get and very cheap. Adjusting the stop is also very fast, just loosen the pinch bolts, slide the rod to the desired position and snug up the pinch bolts. We chose to use Torx-Plus (#27) bolts since these have the best fit, and are least likely to round or deform like an Allen head bolt. We assume these stops will be adjusted often, and the bolts being loosened and tightened many times, so we went with the best fasteners possible. An IP27 Torx-Plus bit is included. We suggest tightening the bolts to 6-9 ft/lbs. (72-108 in/lbs or 8.1-12.2Nm) using a torque wrench. We offer the collet stop with a single 3/8" rod, or in a kit with 8 different size stops included. The stop rods are turned down for 1/8", 3/16", 1/4", 5/16", 3/8". They are all approx 0.010" under the nominal dimension. So if you are locating a 1/4" work piece, the stop rod is 0.240" so the collet does not clamp onto the stop rod, it will insure that the collet clamps the work piece. The 2 smaller rods are aluminum. The 3/8" rod is Stainless Steel. On the opposite end from the 3/8 (0.365") end the rod is machined to a drill point angle, so the larger stops will bottom out securely. (This can be seen in the section view CAD image) NOTE: If the work piece is longer than the clamping section of the collet you can use any of the stops, the stepped down stop rods are only needed when the work piece is short and the stop rod needs to fit up into the clamping section of the collet. See the cutaway CAD diagram. Made in the USA from 6061 aluminum, black anodized. The stop rods are aluminum and stainless steel, the larger stop discs are also black anodized aluminum. Check out our other Collet accessories: 5C Collet Extensions 16C Collet Extensions 3J Collet Extensions 5C Wrenches 16C/3J Wrenches 16C Collet Stop 5C Collet Stop--> 3J Collet Stop Contact us We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours M-F and do our best to help you out! We encourage our customers to contact us with any questions or concerns! We'd like to be sure you are completely satisfied with your purchase. Payment We are using the new eBay payment system. eBay accepts payments via PayPal, PayPal Credit, Credit or Debit Card, Apple Pay, Google Pay, or eBay gift card. Shipping We ship M-F and strive to get every order out the door within one business day. Visit our most popular eBay store categories Machine Shop SuppliesBusiness and IndustrialOverstock / Killer DealsHardware

Price: 26.95 USD

Location: Richmond, California

End Time: 2023-11-22T22:33:00.000Z

Shipping Cost: 0 USD